Table of Contents
Advertisement
Finisher D4, Finisher D4 with Booklet Maker (optional)
No.
Component
1
Tray 8 (Interposer)
2
De-curl button
3
Output tray
4
Finisher tray
5
Booklet output tray
6
Circuit breaker
7
Booklet output tray button
8
Right cover
9
Staple cartridges for
*1
booklet
10
Staple waste container
16
15
14
13
Load paper or transparencies to be used for covers or separators. The
machine does not copy on paper or transparencies loaded in this tray.
Eliminates curl of paper.
Delivers regular copies. Also delivers copies or prints when [Collated] or
[Uncollated] is selected.
Stapled or punched paper is delivered to this tray.
*1
Single-folded or single-folded and stapled paper is delivered to this tray.
This breaker automatically turns the machine off when a current leakage
is detected.
*1
Press this button to move booklets that have been delivered to a
position where they can be removed.
Open this cover to clear paper or staple jams, replace staples, or empty
punch waste.
There are two staple cartridges installed for Booklet Creation (gutter).
Take the cartridges out when clearing staple jams, or when replacing
them with new ones.
Collects waste from the stapler. Remove this cartridge to replace the
staple waste container.
10
9
12 11
Function
Machine Components
1
2
3
5
7
8
4
2
6
39
Advertisement
Table of Contents
