Table of Contents
Advertisement
3 Copy
Z Fold Half Sheet
When the Finisher D4 with Booklet Maker (optional) is installed, the machine folds the
output copies in Z fold. Z fold can be applied to B4, A3, 11 x 17". If you have mixed
sized documents, the width (vertical direction) of the paper must be the same, such as
a combination of A4 (portrait) and A3 (landscape), and a combination of B5 (portrait)
and B4 (landscape). For example, if you have a combination of A4 (portrait) and A3
(landscape), the Z fold is only applied to A3.
Output Destination/Offset
Allows you to select the output destination tray and offset operation.
Note
3
Paper Size and Stapling Position
A4
8 x 10" ,
8.5 x 11"
16K
A4, 8 x 10",
8.5 x 11",
8.5 x 13"
8.5 x 14"
A3, B4,
11 x 17", 8K
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled
132
Offset Stacking
This option is not displayed when the Simple Catch Tray is installed.
The offset is a function for slightly offsetting and outputting each paper stack to allow
you to distinguish the separations.
You can select from [Offset per Set], [Offset per Job], [Offset Every N Pages], [Offset
Every N Sets], and [System Default] for a paper stack.
• This feature does not appear for some models. An optional component is required. For more
information, contact your local Fuji Xerox representative.
Finisher C2/Finisher C2 with Booklet Maker
1 Staple
,
B5 ,
,
,
in the orientation shown in the above table.
1 Top
2 Staples
Right
*
*
2 Top
2 Right
Advertisement
Table of Contents
