Table of Contents
Advertisement
2 Product Overview
Finisher C2 (optional) and Finisher C2 with Booklet Maker (optional)
2
No.
Component
1
Hole punch waste
container
2
Output tray
3
Exit cover
4
Finisher tray
5
Staple cartridge
6
Booklet tray
(Finisher C2 with Booklet
Maker only)
7
Front cover
8
Booklet unit
(Finisher C2 with Booklet
Maker only)
9
Booklet staple cartridges
Note
38
1
9
8
Collects scraps from the puncher. Pull out this container when
discarding punch scraps.
Outputs are delivered here.
Open this cover when clearing paper jams.
Outputs are delivered here.
Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
Documents are delivered here when folding is selected for the Booklet
Creation feature.
Open this cover when clearing paper jams, replacing or adding staples,
clearing staple jams, or discarding punch scraps.
Folds documents in half and staples the folded documents.
There are two staple cartridges installed for Booklet Creation (gutter).
Take the cartridges out when clearing staple jams, or when replacing
them with new ones.
• The Finisher C2 and the Finisher C2 with Booklet Maker are optional. In this guide, the
Finisher C2 and the Finisher C2 with Booklet Maker are referred to as the "finisher".
2
3
4
5
6
7
Function
Advertisement
Table of Contents
