Id Card Copy (Copying Both Sides Of An Id Card) - Fuji Xerox Color 550 User Manual

- 4 Holes
A4 , 7.25 x 10.5" , 8.5 x 11" , 16K
A4 Cover , 9 x 11"
A3, 11 x 15", 11 x 17", 8K

ID Card Copy (Copying Both Sides of an ID Card)

This feature allows you to copy both sides of a small undetectable original, such as an
ID card, onto one side of paper.
Original document
Front side
Back side
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Place the document slightly away from the top left corner of the document glass, and
close the document cover.
Important • Always use the document glass when copying. You cannot use the document feeder with
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.103).
Front side
this feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass
so that the whole image can be scanned.
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in
a different orientation from the original orientation depending on the magnification ratio
specified. For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the
Administrator Guide.
4 Holes
Left
,
Original orientation
Back side
Output Format
4 Holes 4 Holes
Top Right
Copied output
135
3