Table of Contents
Advertisement
2 Product Overview
Inside and right side view of the machine
2
No.
Component
1
Output Tray
2
Circuit breaker
3
Bottom right cover
4
Main power switch
5
Waste toner bottle cover
6
Waste toner bottle
7
Fusing unit
8
Lever
9
Transfer Module
10
Drum cartridges
11
Toner cartridges
36
11
10
9
8
7
Receives output paper.
Two types of trays are available: the Simple Catch Tray and an optional
Offset Catch Tray.
When the optional offset stacking tray is attached and A4 or smaller size
paper is to be output, do not use the extension flap.
This breaker automatically turns the machine off when a current leakage
is detected.
Open this cover to clear paper jams.
When a finisher is attached, first open the front cover of the finisher, and
then open this bottom right cover.
Switches the main power of the machine on and off. Always follow the
instructions by the system administrator.
Important • Always switch the power off before switching the main power off.
Refer to "Power Source" (P.41).
Open this cover when replacing the waste toner bottle.
Collects waste toner.
Fuses toner on paper.
Important • Do not inadvertently touch this unit as it can get extremely hot.
Use this lever when pulling out the Transfer Module.
Transfers an image on the drum to the paper. Open this when removing
jammed paper.
Contains photoconductors and development units.
Drum cartridges are arranged in order R1 (Black), R2 (Cyan), R3
(Magenta), R4 (Yellow) from the left as you face the machine.
Contains Black (K), Cyan (C), Magenta (M), and Yellow (Y) toner (image
forming powder).
4
6
5
Function
1
2
3
Advertisement
Table of Contents
