Fuji Xerox Color 550 User Manual page 40

2 Product Overview
No. Component
11 Staple cartridge
12 Hole punch waste
container
13 Tri-Fold output tray
14 Tri-Fold output tray button
15 Left cover
16 Interface module front cover
*1 Only available when the Finisher D4 with Booklet Maker is installed.
*2 Only available when the Folding Unit (Z and C) is installed.
Note
2
High Capacity Feeder C1-DS (optional)
No. Component
1 Circuit breaker
2 Tray 5 (bypass)
3 Tray 5 (bypass) top cover
4 Feeder module front cover
5 High Capacity Feeder
C1-DS (Trays 6 and 7)
(optional)
40
Contains staples. Remove this cartridge when you need to add staples
or clear staple jams.
Collects waste from the puncher. Remove this when emptying the
container.
*2
Delivers tri-folded (C fold and Z fold) copies.
*2
Press this button to open the Tri-Fold output tray.
Open this cover to access the interior of the machine to clear paper
jams.
Open this cover to clear paper jams.
• The Finisher D4 with Booklet Maker is optional. In this guide, the Finisher D4 with Booklet
Maker is referred to as the "finisher".
2
1
This breaker automatically turns the machine off when a current leakage
is detected.
Use this when copying or printing on paper that cannot be loaded in
Trays 1 - 3, such as heavyweight paper or other special media.
Open this cover to clear paper jams.
Delivers paper fed through the High Capacity Tray or Tray 5 (bypass) to
the main unit. Open this unit when clearing paper jams.
Load paper here.
Function
3
5
Function
4