Table of Contents
Advertisement
2 Product Overview
No.
Component
4
<Main Power> indicator
5
<Custom> buttons
(<Copy>, <Not In Use>,
<Review> buttons)
6
<Log In/Out> button
7
<Clear All> button
2
8
<Energy Saver> button/
indicator
9
<Interrupt> button/indicator
10
<Stop> button
11
<Start> button
12
Numeric keypad
13
<Speed Dial> button
14
<C (Clear)> button
15
<Dial Pause> button
16
<Machine Status> button
17
<Job Status> button
18
<Services Home> button
48
Lights up when the main power is switched on.
Note
• If the main power is not switched on, the machine will not be
powered on even when the power is switched on.
Used to call up associated features.
To the buttons, you can assign [Language] or any service displayed on
the [Services Home] screen.
For information on assigning features to the buttons, refer to "1 Before Using
the Machine" > "Customizing the Control Panel" > "Assigning Services to
<Custom> Buttons" in the Administrator Guide.
Press this button to display the user ID entry screen where you can
switch to System Administration, Authenticated, or Account
Administration mode. When logged in, press this button to log out from
each mode.
Returns all settings to default or to the same status when the machine
was powered on.
When the machine is not used for a while, it enters the Energy Saver
mode to reduce power consumption. When the Energy Saver mode is
active, the <Energy Saver> button lights up.
Press this button to enter or exit the Energy Saver mode.
Press this button to suspend a copy job in progress to have the machine
process another job. During the Interrupt Mode, the <Interrupt> button
lights up. Pressing the <Interrupt> button again exits the Interrupt Mode
and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode. For details, refer
to "8 Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
Press this button to stop the current copy job or communications.
Press this button to start copying or scanning.
Use the numeric buttons on the keypad to enter the number of copies,
passwords, and other numerical values.
This button cannot be used.
Press this button if you have entered a wrong numerical value with the
numeric keypad.
This button cannot be used.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Press this button to check or cancel the current job, or to check
completed jobs.
Used to display the [Services Home] screen.
Function
Advertisement
Table of Contents
