Table of Contents
Advertisement
3 Copy
Prefix
Allows you to enter prefix text with up to 16 characters, using the displayed keyboard.
Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select [Auto Assign] or [Manual Assign]. When you select [Manual Assign],
you can specify the number of digits to be used for page numbers in the range from 1
to 9 in 1 digit increments.
Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.120).
Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
3
Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range from 6 to 24 points in 1 point increments.
[Apply Bates Stamp To] Screen
This screen allows you to specify a page range to add prefix text and page numbers.
1
Select any option.
All Pages
Adds prefix text and page numbers to all pages.
Starting Page Number
Allows you to specify the start page to add prefix text and a page number, in the range
from 1 to 999.
Note
Ending Page Number
Allows you to specify the end page to add prefix text and a page number, in the range
from 1 to 999. The start page is fixed to "1".
Note
Start & End Page Numbers
Allows you to specify the start and end pages to add prefix text and page numbers, in
the range from 1 to 999.
Note
120
• Use [+] and [-], or the numeric keypad to enter the start page number.
• Use [+] and [-], or the numeric keypad to enter the end page number.
• Use [+] and [-], or the numeric keypad to enter the start and end page numbers.
Advertisement
Table of Contents
