Table of Contents
Advertisement
[Stored Watermarks] Screen
This screen allows you to select text to print on copies.
1
Select [On].
2
Select any text.
Off
No text is printed.
On
Text is printed. Select the text to be used for watermark. You can specify text from three
preset options, or text registered in the System Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark"
> "Custom Watermark 1 to 3" in the Administrator Guide.
[Watermark Effect] Screen
This screen allows you to set the Watermark Effect feature.
If you enable the Watermark Effect feature, the text strings specified in [Control
Number], [Stored Watermarks], [User Account Number], [Date & Time], and [Serial
Number] on the [Watermark] screen are embedded in the background of each copy.
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background is printed as embossed or outline text depending on the
option you select on the [Watermark Effect] screen.
Note
1
Select any option.
Off
Prints the text specified in [Stored Watermarks] as it is.
Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
You can specify the size, density, and other settings for the text to be printed with Watermark in the
System Administration mode. For more information, refer to "5 Tools" > "Common Service Settings" >
"Watermark" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact your local Fuji Xerox representative.
Output Format
3
123
Advertisement
Table of Contents
