Fitting Of Rotary Seal And Installation Of Water Pump - Rotax 912-UL Repair Manual

Remove old oitsseal and rotary seal,
utilizing two pins 5 mm (O,Zin.) O O
and suitable punch 9. Renew oil- and
rotary seal. Inspect water pump shaft
for wear, renew as required.
6.11) Fitting of the rotary seal and
water pump
Press new oil seal 0 12x30x7, pre-oiled
sealing lip pointing inwards, into ignition
cover using punch O 876 5/ 0. Carefully press
rotary seal9 on waterpump shaft Ousing&77
520 @ as positive stop.