0FR4-05A
Calling and Copying Mode Memory
NOTE
Calling Mode Memory
When a new Mode Memory is called, all copy settings are replaced with that Mode Memory settings.
After the Mode Memory is called, you can change and copy the settings as you like.
1
Place your document.
"Placing Documents"
"Supported Document Types"
2
Press [
].
3
Select <Mode Memory> using [
4
Select a Mode Memory to call using [
From Mode 1 to Mode 4, you cannot select any Mode Memory which is not registered.
5
Press [
] (Start).
] or [
] and press [OK].
] or [
] and press [OK].