Changing The Scan Settings (Fax) - Canon MF6180dw Manual

0FR4-05U

Changing the Scan Settings (Fax)

This section describes how to change the following scan settings to send a fax.
Resolution
Density
2-Sided Original
Sharpness
For the instructions on how to send a fax, see
Resolution
Specify the resolution.
Higher resolutions result in better image quality but require longer transmission times.
<200 x 100 dpi
(Normal)>
<200 x 200 dpi
(Fine)>
<200 x 200 dpi
(Photo)>
<200 x 400 dpi
(Superfine)>
<400 x 400 dpi
(Ultrafine)>
Density
Specify the density.
[ ]
[ ]
2-Sided Original
Set the scan settings for 2-sided original documents.
For faxes that contain text
For faxes that contain fine text
For faxes that contain photographs
Achieves an even finer resolution than (Fine)
Achieves an even finer resolution than (Superfine)
Decrease the density.
Increase the density.
"Basic Procedures for Sending Faxes."