Specifying The Destination (File Server) - Canon MF6180dw Manual

0FR4-0CA

Specifying the Destination (File Server)

This section describes how to specify destinations.
See the following sections to specify destinations.
Specifying destinations using one-touch keys
Specifying destinations using coded dial codes
Specifying destinations using the address book
For instructions on sending, see
Specifying destinations using one-touch keys
Press the one-touch key (01 to 19) of the destination.
To select a destination from the one-touch keys, you need to register destinations in these keys in advance. (File server
destinations can be registered only from the Remote UI.)
"Registering and Editing One-Touch Keys using the Remote UI"
When the wrong key is pressed
(1) Press [
] (Clear).
(2) Select <Yes> using [
To clear all the scan settings specified, press [
Specifying destinations using coded dial codes
Press [ ] (Coded Dial) and enter the three-digit registration number (001 to 181) with the numeric keys.
To select a destination from the coded dial codes, you need to register destinations in these codes in advance. (File server
destinations can be registered only from the Remote UI.)
"Registering and Editing a Coded Dial Code Using the Remote UI"
When the wrong key is pressed
(1) Press [
] (Clear).
(2) Press [ ] to select <Yes> and press [OK].
To clear all the scan settings specified, press [
"Scanning Fundamentals (File
] and press [OK].
Server)."
] (Reset).
] (Reset).