Setting The Memory Lock Mode - Canon imageRunner 2020 Facsimile Manual

4
Press [
START SPEED> ➞ press [OK].
OK
NOTE
If your document reception is slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
[33600 bps], [14400 bps], [9600 bps], [7200 bps], [4800 bps], or [2400 bps].
5
Press [
press [OK].
OK
Stop
6
Press [Stop] to return to the Standby display.

Setting the Memory Lock Mode

You can set to store received fax documents in memory without printing them. This
is referred as Memory Lock. You can later check the received documents from the
System Monitor menu, and print or erase them.
NOTE
The default setting is 'OFF'.
Additional
1
Functions
Press [Additional Functions] ➞ [
SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Setting the Send/Receive
Start Speed," on p. 7-2.
] or [ ] to select <TX START SPEED> or <RX
] until a desired start speed appears ➞
] or [
] or [ ] until <SYSTEM
Communications Settings
7
7-3