Canon MF6180dw Manual page 454

[Zoom]
Various settings of the advanced mode
Favorite Settings
You can register the input settings, output settings, image settings, color settings, and detailed settings as a set of favorite
settings. The registered favorite settings can be applied to the overall preview image or the scanning area.
IMPORTANT
Items that cannot be registered in favorite settings
Values of width and height in [Input Settings] and [Output Settings]
Activation of the [
Value of [%] (Scale) in [Output Settings]
[User Defined]
[Default]
[Add/Delete]
Input Settings
[Original Input
Method]
[Input Size]
Rescan the focal cropping area of the preview image at a higher level of magnification.
Once clicked, this button changes to [Undo].
] (maintaining the proportion of width and height) button in [Input Settings]
Enter and specify each setting value.
Resets the current setting to the default value. The preview image is deleted.
Displays the [Add/Delete Favorite Settings] dialog box. You can name and register the current
preview image settings. This item is not displayed when there is no preview image.
Selects an input method from the following settings.
[Platen Glass]
[ADF (1-sided)]
[ADF (2-sided)]
NOTE
If you change this setting after previewing
The preview image is deleted.
Select a size of the document to be scanned.
NOTE
If you change this setting after previewing
The preview image is deleted.
If you selected [Platen Glass] or [ADF (1-sided)] from [Original Input Method], you can also
enter values to specify the size.
(Width):
Specifies the width of the input size.
(Height):
Specifies the height of the output size.
NOTE
To change the units of measure
Select any of [Pixel], [Inch], and [Millimeter] from the drop-down list on the right.
Image data scanning limitations
The amount of image data that can be scanned depends on the application being used.
If the scanning setting value exceeds 21,000 x 30,000 pixels, the image cannot be