[Notify]
[Port Number]
[Number of Routers
to Traverse]
[Notification Interval]
(3) Click [OK].
5
Restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it ON again.
Select the check box to notify imageWARE of the power status of the machine. When [Notify] is
selected, you can expect benefits such as the machine reducing unnecessary communication
during sleep mode and reducing the total power consumption.
Enter the port number used for SLP communication with management software.
Specify how many routers the SLP communication packets can pass. Enter a number from 0 to
254.
Specify how often the machine notifies imageWARE of its power status. Enter a number in
seconds from 60 to 65535.