Memory Lock Settings - Canon MF6180dw Manual

0FR4-088

Memory Lock Settings

Normally, received documents are immediately printed. However, you can specify whether or not to store received faxes in
memory before printing. You can then print the stored faxes at any time or delete them without printing to save paper.
How to access the option
[ ] (Menu) -> <System Settings> -> <Communication Management Settings> -> <Memory Lock Settings> ( )
If <Memory Lock PIN> is specified, use the numeric keys [
Settings
(Boldface: Default setting)
Off
On
NOTE
Memory Lock PIN
Press [OK] without entering any numbers when you do not want to set the PIN.
You cannot set a PIN consisting only of <0> (<0000000>).
Memory Lock Settings operations
When memory lock settings are changed from <On> to <Off>, the documents saved in the memory up to then are
combined and printed.
"Combining and Printing the Received Documents You Saved"
At <Memory Lock End Time>, you can combine and print received documents saved in the memory from the
<Memory Lock Start Time> to the <Memory Lock End Time>.
Disable Memory Lock.
Memory
Lock PIN:
Once the PIN is set, you are prompted to enter it every time you change or
disable the Memory Lock mode settings.
Seven-digit
number
Print Report: Specify whether to print the RX result report when receiving a fax.
Off, On Activate
Memory When <On> is set, received faxes are stored in memory only for a specified
Lock Time : length of time.
Off, On Set <Memory Lock Start Time> and <Memory Lock End Time> respectively.
] to [ ] to enter those numbers, and then press [OK].
"Receive Results " to enable this setting.