[
] (Auto Crop)
[
] (Remove
Cropping Frame)
[
] (Left Rotate)
[
] (Right Rotate)
[
] (Information)
Adding/Deleting the output size
Selecting [Add/Delete] in [Output Size] displays the [Add/Delete the Output Size] dialog box. This dialog box enables you to
add and delete the custom output size.
[Output Size List]
[Output Size Name]
[Width]
[Height]
[Unit]
[Add]
[Delete]
[Save]
Specifies the cropping area of the image automatically. For details, see the following.
"Creating a Cropping Frame"
Deletes the selected cropping frames.
Rotates the image 90 degrees in the left.
Rotates the image 90 degrees in the right.
Displays the information of the scanned image.
Displays the registered output size name.
Enter the output size name you want to register.
Specifies the width of the output size.
Specifies the height of the output size.
Selects the unit of measurement for the output size.
Adds the specified output size to [Output Size List].
Deletes the selected output size from [Output Size List].
Saves the registered settings.