Creating A Cropping Frame - Canon MF6180dw Manual

0FR4-0AH

Creating a Cropping Frame

You can create or delete scan areas (cropping areas) for images shown in the preview area.
Selecting the cropping area automatically
Creating a cropping frame
Creating multiple cropping frames (only when using the platen glass)
Deleting cropping frames
Selecting the cropping area automatically
1
Display the preview.
2
Click [ ] (Auto Crop) on the toolbar.
Clicking this button enables you to gradually crop off the image outside the borders detected in the preview image.
Creating a cropping frame
1
Display the preview.
2
Click [ ] (Crop) on the toolbar.
3
Click on the preview image and drag over the areas you wish to select.
If you want to adjust the selected area
Drag the corner or edge of the selected frame or enter the desired values for width and height in [Input Settings] on the
[Advanced Mode] tab.
If you want to move the scanning area
Click the inside of the scanning area and drag it.
NOTE
To maintain the width and height proportions of the original image
Click [ ] in [Input Settings].
If you are using the feeder
Creating a new cropping frame will erase an existing one.
If [ADF (2-sided)] is selected, you may not use the cropping frame.