Lcd (Standby Mode) - Canon MF6180dw Manual

0FR4-00R

LCD (Standby Mode)

This section describes the following modes.
Copy mode
Fax mode
Scan mode
USB Direct Print Mode
NOTE
To change standby display
You can change the standby display that appears when the power switch is turned ON.
"Setting the Default Screen"
When the machine is idle for 2 minutes, the screen returns to the standby display.
"Setting the Auto Reset Timer"
Copy mode
Press [ ] to switch to the copy mode screen.
When the copy mode screen is displayed, you can make your selection by using [
The currently selected menu item is highlighted. Press [OK] to proceed to the next screen.
Fax mode
Press [ ] to switch to fax mode screen.
When the fax mode screen is displayed, you can make your selection by using [
The currently selected menu item is highlighted. Press [OK] to proceed to the next screen.
] or [ ].
] or [ ].