Canon MF6180dw Manual page 30

Hide thumbs Also See for MF6180dw:
Table of Contents

Advertisement

Miscellaneous precautions
The maximum power consumption of the machine is 1,200 W or less.
Electrical noise or a dramatic drop in mains voltage may cause the machine or computer to operate incorrectly or
lose data.
Installation Requirements
A location with sufficient space
A location with good ventilation
A location with a flat, even surface
A location able to fully support the weight of the machine
IMPORTANT
Do not install the machine in the following locations, as this may result in damage to the
machine.
A location subject to dramatic changes in temperature or humidity
A location subject to condensation
A poorly ventilated location
(If you use the machine for a long time or to perform a large amount of printing in a poorly ventilated room, the
ozone or other odors generated by the machine may create an uncomfortable working environment. In addition,
chemical particles are dispersed during printing; therefore, it is important to provide adequate ventilation.)
A location near equipment that generates magnetic or electromagnetic waves
A laboratory or location where chemical reactions occur
A location exposed to salt air, corrosive gases, or toxic gases
A location, such as on a carpet or mat, that may warp from the weight of the machine or where the machine is
liable to sink.
Notes on wireless LAN
This product is designed for indoor use 50 m (may vary on the communication speed or environmental condition) or
less away from an access point. Keep it at an appropriately close distance.
Check if masking is found or not. Communications across walls or between floors are generally deteriorated.
Arrange appropriate installment.
Radio wave interference may occur if any radiowave emitting equipment (i.e. microwave) is found near the product
and its radiowave is in the same frequency band as the radiowave used by a wireless LAN. Keep the product away
from those radio wave interference sources as much as possible.
Installation Space
Required installation space
Leave at least 100 mm of space around the machine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mf6140dn

Table of Contents