Using The Simple Mode - Canon MF6180dw Manual

0FR4-0AE

Using the Simple Mode

Scanning using the simple mode
Simple mode toolbar
Adding/Deleting the output size
Scanning using the simple mode
1
Display the ScanGear MF.
Start the ScanGear MF using one of the following methods.
Selecting [Display the Scanner Driver] in the MF Toolbox
Starting from an application
2
Select a document type in [Select Source].
If you select [Document (Color) ADF] or [Document (Grayscale) ADF], proceed to Step 4.
When selecting a document type other than [Newspaper (B&W)], the automatic color correction function is activated. For
details on how to cancel the function, see
[Photo (Color)]
[Magazine (Color)]
"Using the Advanced
Select when scanning color photos.
Select when scanning color magazines. (with the Descreen function)
Mode."