Enter the user name of the machine that was registered to the LDAP server. Depending on the
type of characters used, up to 120 characters can be entered.
[User Name]
[Set/Change
To specify or change the password, select the check box and enter up to 24 characters in the
Password]
[Password] text box.
When [Use (Security Authentication)] is selected for [Login Information], enter up to 120
[Domain Name]
alphanumeric characters for the directory tree name in Active Directory (example:
example.com).
[Display
Select the check box to require the user to enter the user name and password when a search
Authentication
is requested. If the check box is cleared, entries in the [User Name] and the [Password] text
Screen When
boxes are used for authentication.
Searching]
[Use]
[Use (Security
Authentication)]
When [Use] is selected for [Login Information], enter the user name in the form "(domain
name)\(user name)".
When [Use (Security Authentication)] is selected, enter the user name only (example:
user1).
Select to authenticate the machine using the login information.
Select to use data obtained by Kerberos, a network
authentication protocol, for the authentication password.
If this setting is selected, the clock of the machine needs to be
synchronized with that of the LDAP server.