Function Test <(6) Function Test - Canon iR1020 Series Service Manual

V.34 G3 Signal Transmission Test
A press on '8' on the keypad from the MODEM test menu selectes the V.34 G3 signal transmission test. The V.34 G3 signals below are sent from the modem using
the modular jack and the speaker by pressing the start key. The Baud rate can be changed with the keypad, and the Speed can be changed with the left/right arrow
key.
16.18.5 FUNCTION TEST <(6) FUNCTION TEST>
iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F / iR1024i / iR1024iF
Function test ((6) FUNCTION TEST)
Press the numeric keypad key 6 on the test mode menu to select the function test.
Press numeric keypad keys 1 and 3 to 9 during the function test to enter the menus listed below.
Keypad
1
2
3
4
5
6
7
8
9
G3 signal transmission test (6-1: G3 480 bps Tx)
Press numeric keypad key 1 on the FUNCTION TEST menu to select the G3 signal transmission test. This test transmits 4800-bps G3 signals from the telephone
line connection terminal and speaker.
Sensor test (6-3: SENSOR)
Keypad Baud rate
0 3429baud
1 3200baud
2 3000baud
3 2800baud
4 2743baud
5 2400baud
Left/right arrow key Transmission speed
2400bps
4800bps
7200bps
9600bps
< 12000bps
14400bps
16800bps
19200bps
21600bps
> 24000bps
26400bps
28800bps
31200bps
33600bps
Item
G3 signal transmission test
Not used
Sensor test
ADF test
Book test
Speaker test
Operation panel test
Lamp test
Line signal reception test
T-16-26
Explanation
Transmits 4800-bps G3 signals to a telephone line and
speaker.
Sensor actuation test
ADF operation test
Host machine operation test
Speaker operation test
LCD, LED and control key operation test
Contact sensor illumination test
NCU board signal sensor and frequency counter operation test
Chapter 16
0013-1426
16-43