Canon iR1020 Series Service Manual page 238

Chapter 16
#ACC
Item Initial setting
CARD 0
CC-SPSW 0
COIN 0
CONTROL 0
#COUNTER
Item
TOTAL
PICK_UP
FEEDER
JAM
MISC
DRBL-1
#LMS
#E-RDS
Item
E-RDS SWITCH
RGW-ADDRESS
RGW-PORT
COM-TEST
COM-LOG
#REPORT
#REPORT SW
#REPORT OUTPUT
#REPORT NUMERIC
#DOWNLOAD
#CLEAR
Item
TEL & USER DATA
SERVICE DATA
COUNTER
SOFT-CNT
TYPE
16-8
Range of setting
0 - 99999
0 or 1
0 or 1
0 or 1
Function
total counter
pickup-related counter
feeder counter
jam-related counter
other counter
durables counter
Not used.
Default Setting Range
0 0 / 1
URL of UGW Character string length: 129
bytes(including NULL, one-byte codes
only)
443 1 to 65535
Setting
SERVICE DATA LIST
SYSTEM DATA LIST
SYSTEM DUMP LIST
COUNTER LIST
ERROR LOG LIST
SPEC LIST
SERVICE LABEL
ERDS COM LOG LIST
Download mode
Level2
Function
Card reader installation setting
Control card I/F support setting
Coin vendor change setting
Pinter output control setting at the time of support of control card I/F
Description
Operation mode setting
0 (OFF): Does not operate e-RDS.
1 (ON): Operates e-RDS.
URL of UGW
UGW port No.
Execution of communication test
Details of communication test result
Function
Not used
Output of service data list
Output of system data list
Output of system dump list
Output of counter list
Output of error log list
Output of spec list
Output of service label
Output of communication error log information related to e-RDS
Not used
Function
Use it to clear all areas under user registration/setting.
Use it to clear the counters (numerator), date, and start
data form the system dump list.
Use it to clear the maintenance/parts counter data and each mode counter data.
Not used.
Use it to clear the user data and the service data by specified settings.