Canon iR1020 Series Service Manual page 38

Chapter 1
Additional Functions
5. NETWORK SETTINGS
6. COMMUNICATIONS
7. REMOTE UI
8. ACCESS TO DEST.
9. CHECKING THE LOG
10. USE DEVICE USB
*: indicates factory settings.
1-18
Available Settings
TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON; DHCP, BOOTP,
RARP), IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS, DNS
SETTINGS (PRIMARY SERVER, SECONDARY SERVER, HOST NAME,
DOMAIN NAME, DNS DYNA. UPDATE), CINFIGURE WINS (WINS
RESOKUTION, WINS SERVER), USE LPD (ON(*), OFF), RAW SETTINGS
(ON(*); USE BIDIRECTIONAL, OFF),USE PASV MODE (OFF, ON), FTP
EXTENSION (OFF, ON), USE HTTP (ON(*), OFF), PORT NO., SET IP ADD
RANGE (OFF(*), ON), RX MAC ADD SET. (OFF(*), ON)
SMB SETTINGS: USE SMB CLIENT (OFF, ON; SERVER, WORKGROUP,
COMMENT, LM ANNOUNCE)
SNMP SETTINGS: USE SNMP (ON(*), OFF), COMMUNITY NAME 1,
COMMUNITY NAME 2, SNMP WRITABLE 1 (ON(*), OFF), SNMP
WRITABLE 2 (ON, OFF(*))
DEDICATED PORT: ON(*), OFF
ETHERNET DRIVER: AUTO DETECT (AUTO(*), MANUAL; DUPLEX
(HALF DUPLEX(*), FULL DUPLEX), ETHERNET TYPE (10 BASE-T(*), 100
BASE-TX)
VIEW IP ADDRESS: IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS
E-MAIL/I-FAX: SMTP RX (OFF, ON), SMTP SERVER, POP (OFF, ON), POP
BEFORE SEND (OFF,ON), E-MAIL ADDRESS, POP SREVER, POP
ADDRESS, POP PASSWORD, POP INTERVAl
STARTUP TIME SET.: 0(*) to 300 SEC.
E-MAIL/I-FAX: MAX TX DATA SIZE, DIVIDED OVER MAX
FAX SETTINGS: TX START SPEED (2400 to 33600(*) bps), RX START
SPEED (2400 to 33600(*) bps)
MEMORY LOCK: OFF(*), ON (PASSWORD, REPORT PRINT, MEMORY RX
TIME)
ON(*), OFF
RESTRICT NEW ADD. : OFF(*), ON
FAX DRIVER TX: OFF(*), ON
ON(*), OFF
OFF(*), ON