Pick-Up Solenoid; Removing The Pickup Solenoid; Registaration Solenoid; Removing The Registration Solenoid - Canon iR1020 Series Service Manual

Chapter 10
2) Open the ADF, remove the three screws [1], and then detach the ADF left
lower cover [2].
[1]
3) Release the claw to remove the document edge sensor [1], and then dis-
connect the connector [2].
[2]

10.4.14 Pick-up Solenoid

10.4.14.1 Removing the Pickup Solenoid

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
[1]
10-14
[2]
F-10-36
[1]
F-10-37
[2]
F-10-38
3) Remove the screw [1], and then remove the pickup solenoid [2].

10.4.15 Registaration Solenoid

10.4.15.1 Removing the Registration Solenoid

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
3) Remove the screw [1], and then remove the registration solenoid [2].
0013-1452

10.4.16 Roller Release Solenoid

10.4.16.1 Removing the Roller Release Solenoid

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Detach the rear cover.
[1]
[2]
F-10-39
[1]
[2]
F-10-40
[2] [1]
F-10-41
0013-1453
0013-1454