Audio - IDK MSD-501 Command Reference Manual

3.3.9 Audio

@GSL / @SSL Audio output level
Function Getting
Format @GSL
Return value @GSL, level_1 (,level_2)
Parameter level_1-2: Audio output level
ch_1-2: Output channel
Example
@GSL
@GSL,-4,0
@SSL,1,-4
@SSL,1,-4
Remarks If you change the output level while muted, it will be unmuted.
@SOL Relative value of audio output level
Function Setting
Format
@SOL, ch_1, updown_1 (, ch_2, updown_2)
Return value @SOL, ch_1, updown_1 (, ch_2, updown_2)
Parameter ch_1-2: Output channel
updown_1-2: setting relative value
The specified value is added to the current audio output level. If the total value
exceeds the limit value (-60 to +10), the limit value will be applied.
Example @SOL,1,-1
@SOL,1,-1
Remarks If you change the output level while muted, it will be unmuted.
@GOL Limit status of audio output level
Function Getting
Format @GOL
Return value @GOL, out_1 (, out_2)
Parameter out_1-2: Limit status of audio output level
Example
@GOL
@GOL,1,0
－
Remarks
-60 to +10 [Default] ±0
0 = All outputs, 1 = OUT1, 2 = OUT2
0 = All outputs, 1 = OUT1, 2 = OUT2
-70 to +70
-1 = minimum settable value (-60 dB), 0 = not limit status,
1 = maximum settable value (+10 dB)
MSD-501/502 Command Guide
Setting
@SSL, ch_1, level_1 (, ch_2, level_2)
@SSL, ch_1, level_1 (, ch_2, level_2)
Getting audio output level.
OUT1: -4 dB; OUT2: ±0 dB
Setting OUT1 audio output level to -4 dB.
Completed normally.
Lower 1 dB of audio output level of OUT1.
Completed normally.
Getting limit status of audio output level.
OUT1: maximum settable value
OUT2: not limit value
53