Oil Tank (2-Stroke) - KYMCO VITALITY 50 Manual

4
. LUBRICATION SYSTEM

OIL TANK (2-STROKE)

OIL TANK REMOVAL
Remove the rear body cover. ( 13-6)
Disconnect the oil meter connector (1).
Remove the two bolts from the oil tank.
Disconnect the oil inlet line (2).
Drain the oil inside the oil tank into a clean
container.
Remove the oil tank.
The installation sequence is the reverse of
removal.
• Connect the oil line properly.
• Bleed air from the oil pump after
installation.
• The oil tube clip (at the oil tank side)
must be locked from inside of the oil
tube joint.
VITALITY 50
4-8