KYMCO VITALITY 50 Manual page 203

13
. FRAME COVERS/EXHAUST MUFFLER
FRAME COVERS REMOVAL
HANDLEBAR FRONT COVER
REMOVAL/INSTALLATION
Remove the screw from the handlebar front
cover.
Remove the two screws from the handlebar rear
cover.
Separate the handlebar front cover from
handlebar rear cover.
During removal, be careful not to pull
the joint claws forcibly and remove the
front cover downward.
Disconnect the winker relay from the handlebar
front cover and then remove handlebar front
cover.
Installation is in the reverse order of removal.
VITALITY 50
13-2