9
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
DRIVE BELT
Remove the left crankcase cover. ( 9 -3)
INSPECTION
Check the drive belt for cracks, separation
or abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 17mm replace if below
Use specified genuine parts for
replacement.
REPLACEMENT
Remove the ten left crankcase cover bolts
and left crankcase cover. ( 9 -3)
Hold the clutch outer with the universal
holder and remove the 10mm clutch outer
nut and clutch outer.
Special
Universal holder
Hold the drive pulley with the holder and
remove the 12mm drive face nut.
Remove the starting ratchet.
Remove the drive pulley face.
9-7
E017
Clutch Outer
Clutch Outer Nut
Universal Holder
Ratchet
Drive Face Nut
VITALITY 50
Drive Face