KYMCO VITALITY 50 Manual page 210

13
. FRAME COVERS
LEG SHIELD
REMOVAL/INSTALLATION
Remove the following:
Rear carrier ( 13-5)
Right and left side cover ( 13-4)
Met-in box ( 13-5)
Center cover ( 13-6)
Rear body cover ( 13-6)
Battery cover ( 16-5)
Battery ( 16-5)
Fuse ( 16-5)
Floor board ( 13-8)
Remove the ten screws and one bolt from the
leg shield.
Turn the ignition switch cover (1)
counterclockwise and remove ignition switch
cover, then remove leg shield.
When removing the right and left side
rails, pull them backward not to damage
the joint claws.
Installation is in the reverse order of removal.
FRONT BODY COVER
REMOVAL/INSTALLATION
Remove the following:
Front cover ( 13-4)
Right and left side cover ( 13-4)
Remove the two nuts form the front body
cover.
13-9