KYMCO VITALITY 50 Manual page 207

13
. FRAME COVERS/EXHAUST MUFFLER
CENTER COVER
REMOVAL/INSTALLATION
Remove the met-in box. ( 13-5)
Remove the two screws and then remove center
cover.
When removing the right and left side
rails, pull them backward not to damage
the joint claws.
Installation is in the reverse order of removal.
REAR BODY COVER
REMOVAL/INSTALLATION
Remove the following:
Met-in box ( 13-5)
Center cover ( 13-6)
Rear carrier ( 13-5)
Remove the two screws from the rear fender.
Remove the two screws form the rear body
cover.
Disconnect the seat lock cable and then remove
rear body cover.
When removing the right and left side
rails, pull them backward not to damage
the joint claws.
Installation is in the reverse order of removal.
VITALITY 50
13-6