KYMCO VITALITY 50 Manual page 137

9
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
First install the washer and then the circlip
onto the kick starter spindle.
Install the kick lever.
LEFT CRANKCASE COVER
INSTALLATION
First install the dowel pins and then the seal
gasket.
Install the left crankcase cover and tighten
the ten bolts diagonally.
Connect the drive belt cooling air tube and
install the circlip.
For drum brake, note the location of the
brake cable clamp and install the rear
brake cable in place with the clamp.
Washer
Dowel Pins
Seal Gasket
Left Crankcase Cover
Rear Brake Cable Clamp
VITALITY 50
Circlip
9-6