Oil Meter - KYMCO VITALITY 50 Manual

17
. INSTRUMENT/SWITCHES/LIGHTS
INSTALLATION
The installation sequence is the reverse of
removal.
• Align the groove on the fuel unit with
the flange on the fuel tank.
OIL METER (2-STROKE)
INSPECTION
Remove the rear body cover. ( 13-6)
Disconnect the oil meter wire connectors
and remove the oil meter. Keep the oil
meter float at the lower position.
Measure the resistances between the wire
terminals as and
figure.
Wire Terminals
Green/Red(+)～Black(-)
Green(-)～Black(+)
Before removing the oil meter, be sure
to drain the motor oil and do not allow
sparks or flames near the working area.
17-3
shown in the left
Resistance
46Ω
∞
Flange
Groove

Oil Meter

G/R B
Float
VITALITY 50
B
G