KYMCO VITALITY 50 Manual page 178

12
. CARBURETOR
Remove the jet needle by removing the
needle clip.
Check the jet needle and throttle valve for
wear or damage.
THROTTLE VALVE INSTALLATION
Install the jet needle on the throttle valve
and secure with the needle clip.
Install the rubber seal on the throttle cable
and then install the carburetor top and
throttle valve spring.
Connect the throttle cable to the throttle
valve.
Jet Needle
Throttle Valve
Rubber Seal
Throttle Valve Spring
Throttle Valve
Throttle Cable
VITALITY 50
Needle Clip
Needle Retainer
2nd Notch (STD)
Carburetor Top
12-6