6. 4-STROKE: CYLINDER HEAD/VALVES
VITALITY 50
Nuts
CYLINDER HEAD
REMOVE
Remove the camshaft. (Refer to the
"camshaft remove" section in the chapter 6)
Remove the carburetor. (Refer to the
"CARBURETOR REMOVE" section in the
chapter 12)
Remove the exhaust muffler. (Refer to the
"EXHAUST MUFFLER REMOVE"
section in the chapter 13)
Remove the two nuts and then remove the
carburetor intake manifold and insulator.
Intake Manifold
Remove the cooling fan cover. ( Ö 8-3)
Remove the engine cover bolts and screws.
Separate the engine cover joint claws.
Seal Shroud
Remove seal shroud, then remove two bolts
and cylinder head.
Bolts
6-10