KYMCO VITALITY 50 Manual page 148

9
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Set the driven pulley, driven face spring and
clutch assembly onto the clutch spring
compressor. Compress the tool and install
the 39mm drive plate nut.
Tighten the 39mm nut to the specified
torque.
Torque: 5.0 6.0kg-m
Special
Universal holder
CLUTCH/DRIVEN PULLEY
INSTALLATION
Install the drive belt on the clutch/driven
pulley and then install the clutch/driven
pulley onto the drive shaft.
Install the clutch outer.
Hold the clutch outer with the universal
holder.
Install and tighten the 14mm clutch outer
nut.
Torque: 3.5 4.5kg-m
Special
Universal holder
9-17
E034
Clutch/Driven Pulley
E017
VITALITY 50
Clutch spring compressor
Universal Holder
Clutch Outer