Oil Meter - KYMCO ZX/SCOUT 50 Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS
INSTALLATION
The installation sequence is the reverse of
removal.

OIL METER

INSPECTION
Remove the met-in box. ( 12-4)
Remove the frame body cover. ( 12-4)
Disconnect the oil meter wire connectors
and remove the oil meter.
meter float at the lower position.
Measure the resistances between the wire
terminals as and
figure.
Wire Terminals
Green/Red(+) Black(-)
Green(-) Black(+)
Oil Meter Operation Inspection
Connect the oil meter wire connectors and
turn the ignition switch ON.
Measure the resistance between the wire
terminals with the float at upper position.
Green/Red(+) Black(-)
16-3
Keep the oil
shown in the left
Resistance
5 16Ω
∞
About 340Ω
Oil Meter
G/R
Float
Light OFF
Light ON
ZX / SCOUT
Retainer
B
G
G
B
4.5±1.0mm