Table of Contents
Advertisement
Status Indicator RAPs
2 JAM 0 RAP
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Paper is not fed from the cassette tray.
Jam 0 occurs when paper feeds into the machine.
Check and Cause
1. Clear any paper jams in the machine.
2. Check the surface of the pick-up assembly,
PL 4 for contamination or damage.
3. The main motor, PL 5 may be defective.
4. The solenoid, PL 4 is faulty.
5. If paper feeds into the printer and Jam 0
occurs, check the feed sensor.
Note: The feed sensor is mounted on the
SMPS, PL 1.
2-6
WARNING
Figure 1
1. Refer to clearing paper jams, GP 6.
2. Clean the pick-up assembly, PL 4 using a
soft cloth dampened with IPA (Isopropyl Alco-
hol) or water.
3. If the main motor is not working, refer to
RAP 14.
4.Check and install a new solenoid if neces-
sary, PL 4.
5. Check and install new parts as necessary:
•
SMPS, PL 1
•
Main PBA, PL 1
09/06
Solution
PHASER 3124 / PHASER 3125
Advertisement
Chapters
Table of Contents
