3.4.6 Muting the Microphone or the Handset
Switching from a Voice Conference Call to a Video Conference Call (KX-HDV430
only)
1.
During a voice conference call, tap "Video Call".
Removing a Party from the Conference
During a conference, you can remove other parties from the conference. However, this operation is
available only during conference calls you initiate.
1.
During a conference call, press
2.
Press
/ /
HOLD
3.
Tap
or
, and select the party to remove.
4.
Talk to the party and go on-hook to end the call.
5.
Press
/ /
HOLD
Ending a Conference Call
To end the conference call, go on-hook.
3.4.6 Muting the Microphone or the Handset
You can disable the microphone or the handset to consult privately with others in the room while listening to
the other party on the phone through the speaker or the handset.
To set/cancel
1.
Press
/
MUTE/AUTO ANS
Note
•
When the
•
During Mute, even if you switch from/to speakerphone, Mute will continue.
•
During Mute, even if you connect/disconnect a headset, Mute will continue.
3.4.7 Using Call Waiting
During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second
call by disconnecting or holding the current call. If the call waiting screen is displayed, you can switch to the
line display or combined display
original screen again by pressing /
receive a call waiting tone and the caller's information. For details, contact your phone system dealer/service
provider.
The combined display is displayed if it is set as the standby screen.
*1
To disconnect the current call and then talk to the new party
1.
Go on-hook.
2.
Go off-hook.
To hold the current call and then talk to the new party
1.
Do one of the following:
66
Operating Instructions
/ /
HOLD
again to show the conference parties on hold.
.
.
icon is displayed in the status bar, Mute is on.
by pressing /
*1
HOME
.
or by waiting 10 seconds. You can return to the
HOME
. This is an optional telephone company service. You can
Document Version: 2017-08