Audio Setup Menu - Sony PCS-1 Operating Instructions Manual

Audio Setup Menu

The Audio Setup menu is used to set various
audio items.
Page 1/2
The level meter indicating the audio input
level is displayed.
Audio Setup
Page: 1/2
Input Select
Mic Select
CTE
Echo Canceler
Lip Sync
Recording Mute
Input Select
Selects the sound to be input.
MIC: Inputs the sound of the microphone.
AUX: Inputs the sound from external
equipment.
MIC+AUX: Inputs both sounds from the
microphone and external equipment.
Mic Select
Selects the microphone to be used.
Internal: Uses the built-in microphone.
External: Uses the microphone connected
to the Communication Terminal.
DSB MIC: Uses the microphone connected
to the Data Solution Box.
CTE
Selects the input to which the CTE-600
Communication Transducer is connected.
Off: Does not use the CTE-600
Communication Transducer.
AUX: Inputs from the AUDIO IN jack on
the Communication Terminal.
DSB AUX IN: Inputs from the AUX IN jack
on the Data Solution box.
Echo Canceler
Selects whether you use the echo canceler.
Internal: Enables the built-in echo canceler.
External: Uses the echo canceler of the
external equipment connected.
The input from the AUDIO IN jack on
the Communication Terminal is always
46
Registering Local Information
MIC
Internal
Off
Internal
Off
On
Save Cancel
available regardless of the "Input
Select" setting.
Off: Disables the built-in echo canceler.
Lip Sync
Selects whether to enable the Lip Sync
function.
On: Enables the Lip Sync function. The
movement of the speaker's lips is
synchronized with his voice.
Off: Disables the Lip Sync function.
Recording Mute
When connecting a video cassette recorder
to the AUDIO IN/AUDIO OUT (MIXED)
jacks to record the sound for a conference,
the recording mute function prevents echo
from reflecting on a remote site. This item is
only available when "Input Select" is set to
"AUX" or "MIC + AUX".
On: Enables the recording mute function.
Off: Disables the recording mute function.
Page 2/2
Audio Setup
Page: 2/2
Beep Sound
Sound Effect
Dial Tone
Ringer Tone
Beep Sound
Selects whether the beep sounds when you
press the button on the Remote Commander.
On: Enables beep.
Off: Disables beep.
Sound Effect
Selects whether or not to output the sound
when the system starts up, a
videoconference starts, or the
videoconference ends.
On: Outputs the sound.
Off: Does not output the sound.
On
On
On
On
Save Cancel