To use an SMB/CIFS network, it is necessary to perform the following procedures.
1
Protocol Settings (See "Protocol Settings," on p . 6-3 .)
Specify the protocol settings. To specify the settings, use:
•
The machine's control panel
•
The Remote UI (via a web browser).
2
Computer Settings for Printing (See e-Manual > Network)
Specify the settings of each computer you use for printing. (Optional equipment is required to print from a computer. For the equipment needed, see "Optional Equipment and
System Requirements for Connecting to a Network, " on p. 2-2.)
3
Computer Settings for a File Server (See "Setting Up a Computer as a File Server," on p . 6-6 .)
Specify the settings of the computer receiving data sent from the machine.
6
•
It is recommended that steps 1 and 3 above be performed by the network administrator.
•
The only base protocols supported by the machine for SMB/CIFS networks are TCP/IPv4 and TCP/IPv6. NetBEUI is not supported (SMB is used as
a print application).
•
If you are using the imagePASS, see the manual provided with the imagePASS.
•
If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS.