Canon imageRUNNER ADVANCE 8105 Getting Started page 53

4
The screens shown below are displayed while the system software is loading .
If you are using a login service, log in using the procedure for the login service you are using.
•
You can select which functions to display on the screen when turning ON the main power, according to the Settings/Registration
settings. (See e-Manual > Settings/Registration.)
•
If a Macintosh, which has been shut down, is connected to the machine via a USB cable, when you turn the machine ON, the Macintosh
may also turn ON. In this case, disconnect the Macintosh from the machine. (You may also be able to solve this problem by using a USB
hub between the machine and the Macintosh).
•
If you are using Department ID Management with the Card Reader, see e-Manual > Optional Products/Software.
•
If you are using Department ID Management, see e-Manual > Basic Operations.
•
If you are using SSO-H, see e-Manual > Basic Operations.
Main Power and Control Panel Power
1
1-15