Main Power And Control Panel Power; How To Turn On The Main Power - Canon imageRUNNER ADVANCE 8105 Getting Started

Main Power and Control Panel Power

The machine is provided with two power switches, a main power switch and a control panel power switch, as well as a breaker
that detects excess current or leakage current.

How to Turn ON the Main Power

1
This section explains how to turn ON the main power.
If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator is turned OFF
before turning ON the main power.
1
Make sure that the power plug is firmly inserted into the power outlet .
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock .
2
Turn ON the power of the optional equipment (the Professional Puncher, Professional Puncher
Integration Unit, etc .) .
3
Press the main power switch to the ON ("I" side) position .
The main power indicator on the control panel lights when the main power switch is turned ON.
When operating the main power switch, open the main power switch cover.
If the main power indicator on the control panel does not light even though the main power switch is ON, be sure to check the breaker
to see if it is OFF. (See e-Manual > Problem Solving.)
1-14

Main Power and Control Panel Power