6
On the TCP/IP Settings screen, press [Use FTP PASV Mode] → specify the following .
4
Whether you use the PASV mode for FTP depends on the network environment you are using and the settings of the file server you are
sending to. Before specifying the PASV mode for FTP, consult your network administrator.
7
On the TCP/IP Settings screen, press [IPP Print Settings] → specify the following .
[On]: You can use IPP as the print application. Pressing [On] for [IPP Print Settings] automatically sets [Use HTTP] to 'On' .
To use SSL to encrypt the IPP data, press [On] for <Use SSL>.
If you are using IPP authentication, press [On] for <Use Authentication> → enter the user name to use for IPP authentication in [User], and
the password to use for IPP authentication in [Password].
In order to select [On] for <Use SSL> to allow SSL communication, a key pair is necessary. You can use the preinstalled key pair, or
generate an original key pair with the machine, to set as the default key. For information on the default key, and instructions on how to
generate an original key pair, see e-Manual > Security.
4-18
Protocol Settings