Handling - Canon imageRUNNER ADVANCE 8105 Getting Started

Handling

•
Do not attempt to disassemble or modify the machine . There are high-temperature and high-voltage
components inside the machine which may result in a fire or electrical shock .
•
If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF
the main power switch, and disconnect the power cord from the power outlet . Then, contact your local
authorized Canon dealer . Continued use of the machine in this condition may result in a fire or electrical
shock .
•
Do not use highly flammable sprays near the machine . If gas from these sprays comes into contact with the
electrical components inside the machine, it may result in a fire or electrical shock .
•
To avoid damage to the power cord and creating a fire hazard, always turn OFF the main power switch, and
unplug the interface cable when moving the machine . Otherwise, the power cord or interface cable may
be damaged, resulting in a fire or electrical shock .
•
Make sure that the power plug is firmly inserted into the power outlet if the machine was moved . Do not
use the machine while the connection is loose, as doing so may cause a fire .
•
Do not drop paper clips, staples, or other metal objects inside the machine . Also, do not spill water,
liquids, or flammable substances (alcohol, benzene, paint thinner, etc .) inside the machine . If these items
come into contact with a high-voltage area inside the machine, it may result in a fire or electrical shock . If
these items are dropped or spilled inside the machine, immediately turn OFF the main power switch, and
disconnect the power cord from the power outlet . Then, contact your local authorized Canon dealer .
•
Do not place heavy objects on the machine, as they may tip over or fall resulting in personal injury .
•
Close the feeder gently to avoid catching your hands, as this may result in personal injury .
•
Do not press down hard on the feeder when using the platen glass to make copies of thick books . Doing so
may damage the platen glass and result in personal injury .
•
Do not touch the finisher while the machine is printing, as this may result in personal injury .
•
Paper that has just been output from the machine may be hot . Be careful when removing or aligning
paper from the output tray . Touching paper right after it is output may result in low-temperature burns .
•
Turn OFF the control panel power switch for safety when the machine will not be used for a long period of
time, such as overnight . Also, turn OFF the main power switch, and disconnect the power cord for safety
when the machine will not be used for an extended period of time, such as during consecutive holidays .
xxvi