Canon imageRUNNER ADVANCE 8105 Getting Started page 137

4
To use the authentication function for SMB printing, press [SMB Auth . Settings] → specify the
following .
[On] for <Use SMB Authentication>: Only users who have User Access Control for Advanced Box authentication can perform SMB printing.
(For information on User Access Control for Advanced Box, see e-Manual > Security.) For SMB printing, NTLMv1 and NTLMv2 can be
selected both individually or together.
[NTLMv1] for <Authentication Type>: You can use NTLMv1 authentication.
[NTLMv2] for <Authentication Type>: You can use NTLMv2 authentication. Select this setting when using Windows Vista/7/Server 2008.
5
On the TCP/IP Settings screen, press [WINS Settings] → specify the following .
[On] for <WINS Resolution>: You can resolve the name with WINS. Enter the IP address of a WINS server in [WINS Server Address].
Enter the [Scope ID] settings if a scope ID is set on the computer in the network environment you are using. The scope ID is an identifier for
determining the range available to a printer or computer. The scope ID set here is used regardless of the setting for <WINS Resolution>.
•
If DHCP determines the IP address, the IP address obtained from a DHCP server is overwritten with the IP address of a WINS server
(obtained from the DHCP server), whenever possible.
•
If you set a scope ID, the machine cannot communicate with any computer whose scope ID is different from the scope ID you set here.
•
If a scope ID is not set on any of the computers in your network environment, leave [Scope ID] blank.
6
6-5
Protocol Settings