2
On the Network screen, press [Ethernet Driver Settings] → specify the following .
3
●
If you want the machine to automatically determine the communication mode and Ethernet type:
☐
<Auto Detect>: [On]
If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the machine's main power
switch ON, the Auto Detect function will not work even if you set <Auto Detect> to [On]. Turn OFF the machine, wait at least 10
seconds, and then turn it ON. (Connect the cable with the machine's main power switch OFF.)
•
The machine automatically determines the Ethernet type. Press [On] unless you want to specify a particular Ethernet setting.
•
If you set <Auto Detect> to 'On' , the machine will not enter a complete Sleep mode.
●
If you want to manually set the communication mode and Ethernet type for specifying a particular Ethernet
type setting:
☐
<Auto Detect>: [Off ].
Select the appropriate items for <Communication Mode> and <Ethernet Type>, according to the network environment you are using.
•
To connect with 1000Base-T, select [Full Duplex] for <Communication Mode>.
•
If you select [10 Base-T] or [100 Base-TX] for <Ethernet Type>, the machine will not enter a complete Sleep mode.
3-8
Interface Settings