Protocol Settings
This section describes how to specify the protocol settings for the machine using the control panel. If you are configuring the
settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details, see
e-Manual > Settings/Registration or Remote UI.
TCP/IP Settings
1
Specify the TCP/IP settings .
If you have not entered the TCP/IP settings yet, enter them now. (For more information, see "TCP/IPv4 Settings, " on p. 4-3, "TCP/IPv6 Settings, "
on p. 4-9 and "Settings Common to TCP/IPv4 and TCP/IPv6, " on p. 4-15.)
SMB and WINS Settings
To use the machine on an SMB/CIFS network, specify the SMB settings.
To resolve a name with WINS(Windows Internet Name Service), specify the WINS settings using the following procedure. WINS is
a service for associating a NetBIOS name (which is a computer name or printer name on an SMB/CIFS network) with an IP address.
To use WINS, specify the IP address settings for the WINS server.
1
On the Network screen, press [SMB Server Settings] → select [On] for <Use SMB Server> .
If you set <Use SMB Server> to 'On' , the machine will not enter a complete Sleep mode.
6
6-3
Protocol Settings